Summer overheating is prevented most effectively where the heat builds up: in front of the glazing. Shading specialists install roller shutters, louvre blinds, awnings and venetian blinds, replace defective systems and retrofit motors and controls. The difference between external and internal solar shading is not a detail, but the whole point.
A shading specialist installs and replaces roller shutters, louvre and venetian blinds, awnings and screens, retrofits motors, replaces snapped straps and defective shafts, and connects the controls to timers, wind and sun sensors or a building automation system. Maintenance and repair of existing systems are also part of the job.
External solar shading keeps the heat off the glazing; internal shading lets it into the room and only blocks the light. For summer heat protection, the difference is considerable. Curtains and internal roller blinds provide glare control and privacy, not heat protection. If you want to tackle overheating, invest outside first and only then inside.
Roller shutters black out completely and also offer added burglary resistance, but they let no light through. Louvre and venetian blinds allow daylight while blocking the sun, but are more sensitive to wind. Awnings shade seating areas, screens keep out heat and still allow a view outside. Tell the specialist which function matters most rather than asking for a product.
Motorised systems on the façade need a wind sensor that retracts them in a storm. Without this protection, storm damage is only a matter of time, and many insurers reduce the payout if the specified protective device was missing. Also clarify early with the electrician where the supply and control cables will run; cables installed later are visible or expensive.
New blind boxes, changed colours and awnings on the street-facing façade may require approval, especially in historic core and protected townscape zones and in apartment buildings with a uniform appearance. In condominium ownership, consent from the owners' association is also required because the façade is a shared building element.
When windows are being replaced, the shading specialist works directly with the window installer because fixing points and box dimensions change. The electrician is involved for the power supply and controls, and if the façade is being insulated, the façade contractor too, because the blind guides have to pass through the insulation layer. This coordination before installation saves expensive rework.