The electrical installation is the trade you only notice when something is missing: too few sockets, a distribution board without residual-current protection, no provision for a charging point or heat pump. Electricians renew wiring and distribution boards, fit sockets and switches, install lighting, and connect photovoltaic systems, blinds and charging infrastructure.
They renew main distribution boards and wiring, fit sockets, switches and lighting, install charging points for electric vehicles, connect heat pumps and photovoltaic systems, and integrate blinds and building control systems. During refurbishments, they plan the first fix and later return to site for the second fix, fitting the visible components.
Signs include a distribution board without residual-current devices, fabric-insulated wiring or obsolete neutral-conductor systems dating from before current standards, too few circuits, and fuses that trip frequently. In a full refurbishment, a complete rewire is almost always worthwhile, because the wiring is accessible anyway and the walls will then be closed up for decades.
Our Renovation Costs guide gives an approximate figure of around CHF 8'000 to 15'000 for completely new electrical wiring in a single-family house, and around CHF 3'000 to 5'000 for a new main distribution board. Sockets, switches and lighting are extra. The range is wide because cable runs, accessibility and the number of circuits vary greatly.
The first fix must be completed and inspected before the plasterer closes the walls. Anything missing afterwards has to be chased in or added surface-mounted, and either option is costly or visible. So before the first fix, go through it room by room and decide where sockets, switches, light fittings, network points and future connections should go.
Empty conduits and spare ways in the distribution board cost almost nothing during the refurbishment and many times more later. Plan spare capacity for a charging point, heat pump, photovoltaic system and network cabling, even if you do not need them today. A charging point often also requires notification to the network operator; clarify the available connection capacity early on.
Electrical installations are subject to a periodic inspection requirement, and after work on the installation a certificate of safety must be issued. Ask for this certificate and keep it: it is required when selling the property and, in the event of a claim, is your proof to the insurer that the work was carried out properly.